120v to 100v step down transformer for Japanese consoles in the US?
120v to 100v step down transformer for Japanese consoles in the US?
posted by LeHaM on Nov 2, 2013:
There is really no need for one eg: 120v to 100V
There is really no need for one eg: 120v to 100V
120v to 100v step down transformer for Japanese consoles in the US?
posted by smf on Nov 2, 2013:
http://www.faqs.org/faqs/electrical-wiring/part1/section-14.html
In the UK we've officially changed to match the rest of europe, but the reality is slightly different
"In the UK the nominal supply voltage is 230 -6% +10% to accommodate the fact that most supplies are in fact still 240 V"
The nominal voltage is 120V, what you actually get is slightly more complicated.
FireAza said:
I thought America was 110v? I have a US step-down transformer and it says 110v on it. Anyway, I use this transformer to play my Japanese consoles, no problems at all.
http://www.faqs.org/faqs/electrical-wiring/part1/section-14.html
In the UK we've officially changed to match the rest of europe, but the reality is slightly different
"In the UK the nominal supply voltage is 230 -6% +10% to accommodate the fact that most supplies are in fact still 240 V"
120v to 100v step down transformer for Japanese consoles in the US?
posted by Tripredacus on Jan 5, 2015:
Amperage is a draw, which means you can use the amp value as a minimum value and need not be exact. It will only use as much as it needs. It is voltage you need to match up as close as possible.
Amperage is a draw, which means you can use the amp value as a minimum value and need not be exact. It will only use as much as it needs. It is voltage you need to match up as close as possible.
120v to 100v step down transformer for Japanese consoles in the US?
posted by Flash on Nov 5, 2013:
Not really. If PSU is regulated, then a few more amps won't make any difference, for example 3A instead of 0.5A means only that PSU will heat less.
Not really. If PSU is regulated, then a few more amps won't make any difference, for example 3A instead of 0.5A means only that PSU will heat less.
120v to 100v step down transformer for Japanese consoles in the US?
posted by 1983parrothead on Jan 3, 2015:
I decided to bump this thread, because I recently purchased an FM TOWNS II HR model computer and it sometimes powers off when running it through US power without a voltage converter. I did some research and I keep bumping into this:
http://www.amazon.com/VCT-VT-500J-Japanese-Transformer-Converts/dp/B000PC4JL4
I asked "batteries plus bulbs" store and they said it's not necessary to use a converter, but how do you explain the FM TOWNS II HR powering off by itself?
I decided to bump this thread, because I recently purchased an FM TOWNS II HR model computer and it sometimes powers off when running it through US power without a voltage converter. I did some research and I keep bumping into this:
http://www.amazon.com/VCT-VT-500J-Japanese-Transformer-Converts/dp/B000PC4JL4
I asked "batteries plus bulbs" store and they said it's not necessary to use a converter, but how do you explain the FM TOWNS II HR powering off by itself?
120v to 100v step down transformer for Japanese consoles in the US?
posted by AmmoJammo on Jan 3, 2015:
completely the other way around :/
Tripredacus said:
Voltage is a draw, which means you can use the voltage value as a minimum value and need not be exact. It will only use as much as it needs. It is amps you need to match up as close as possible.
120v to 100v step down transformer for Japanese consoles in the US?
posted by LeHaM on Jan 4, 2015:
the psu will run in the 100v range fine ie: 100/110/120v it's within the 20% tolerance.
Bad power supply most likely bad capacitors. Have it looked at.
1983parrothead said:
I decided to bump this thread, because I recently purchased an FM TOWNS II HR model computer and it sometimes powers off when running it through US power without a voltage converter. I did some research and I keep bumping into this:
http://www.amazon.com/VCT-VT-500J-Japanese-Transformer-Converts/dp/B000PC4JL4
I asked "batteries plus bulbs" store and they said it's not necessary to use a converter, but how do you explain the FM TOWNS II HR powering off by itself?
the psu will run in the 100v range fine ie: 100/110/120v it's within the 20% tolerance.
120v to 100v step down transformer for Japanese consoles in the US?
posted by retro on Jan 4, 2015:
Just like any PC, turning itself off is indicative of a fault. It's probably doing it for safety reasons. It could be the PSU, but it could also be something telling the motherboard to shut down. Heat sensor, fan sensor, bad caps etc.
1983parrothead said:
I asked "batteries plus bulbs" store and they said it's not necessary to use a converter, but how do you explain the FM TOWNS II HR powering off by itself?
120v to 100v step down transformer for Japanese consoles in the US?
posted by Tripredacus on Jan 5, 2015:
Hope no one blew up anything because of my post. I fixed it.
AmmoJammo said:
completely the other way around :/
120v to 100v step down transformer for Japanese consoles in the US?
posted by android34 on Sep 4, 2015:
If a Nintendo Color TV Game system is designed for an Output of 9 DC, would, let's say, a 10V DC Famicom or Sega Genesis/Master System adapter be ok to use with it?
If a Nintendo Color TV Game system is designed for an Output of 9 DC, would, let's say, a 10V DC Famicom or Sega Genesis/Master System adapter be ok to use with it?