フレームマイスター Framemister Xrgb mini/ English firmware/39000 yen shipped

[Archive]

posted by Ring Out on Aug 20, 2016:

No, Parodius Deluxe Pack Fantastic Journey
On Fantasy Zone ( Sega Ages) its also recognizable, best if you increase sharpness and lower the A/D level.
 

[Archive]

posted by AtomizerZero on Aug 20, 2016:

Just tried Fantasy Zone. Did as you said... It's clean as a whistle no matter what. Not sure what to say tbh.
 

[Archive]

posted by Ring Out on Aug 20, 2016:

Ok, thanks for check that out!
Maybe, I'm able to upload a video later to show the problem
 

[Archive]

posted by Ring Out on Aug 21, 2016:

If you are look at the blue sky the you will recognize the darker part on the left site (FM setting: sharpness at 30 and a/d at 28 with picture Mode). With the normal setting it is hard to show the issue on a video. Unfortunately I don't Owen a captute card.
On some games this causes pixel smudge on scrolling backgrounds, like I have tried to show with the Parodius picture.
So my qustion, is this problem just on my mini or is this on all minis when you change the settings like I described above?
I now, I'm maybe ab bit obsessed with that problem, but I want to rule out that my mini is faulty for some reason.
Thanks guys!
 

[Archive]

posted by Borman on Aug 21, 2016:

Did you try a different TV yet?
 

[Archive]

posted by Ring Out on Aug 21, 2016:

Yes I did, same result. I also tried different HDMI cables and a different FM.
 

[Archive]

posted by AtomizerZero on Aug 21, 2016:

I'd say its your console of the connection between the console and the FM. That the only part you haven't changed.
 

[Archive]

posted by Ring Out on Aug 22, 2016:

Are you referring to component cable between consoles and FM?
Unfortunately I have that problem on ALL analog inputs on all my consoles.
Since I changed everthing I can, it seems to be a rendering quirk on picture mode.
With LPF modes the problem disappear. But I don't like the loss of detail with those modes.
 

[Archive]

posted by AtomizerZero on Aug 22, 2016:

I really don't have this issue with anything. I've tried all my consoles on all connections. You need to list exactly what you have connected.

For Example. For my PS2 I have a PS2 Component cable going into a passive component splitter. That then connects to a D-terminal Component adapter which plugs into the D-terminal on the FrameMeister. I then have HDMI coming out of the framemeister and usually it goes into my Pioneer AV Receiver, which then either goes to a monitor or my projector via HDMI again. My gamecube follows the same pattern, into another Component input on the splitter.

My other consoles all connect via RGB Scart cables. They go into the RGB in socket through a Euro Scart to RGB in adapter. My Scart cables are all wired to be Euro standard.
 

[Archive]

posted by Ring Out on Aug 22, 2016:

Ok, here we go:
My Ps2 component cable goes into D-terminal adapter then into the Framemeister.
My MD1, Saturn model 1, Neo Geo AES, Xbox are connected all via Euro-Scart CSYNC RGB-Cables through aShinybow sb-5525.
My DC is connected via Toro VGA-Box with scart also into the Shinybow.
The Shinybow is connected via Packapunch scart to the euro Scart passive Adapter into the Framemeister.
From the Framemeister an HDMI-Cable goes to my tv.

Thanks for testing AtomizerZero.